Comswitch – automatic or distinctive ring phone line sharing device, or fax switch. Replaced by the Multi-Link Stick or SR Find great deals for Command Communications ComSwitch 4 Port Line Sharing System. Shop with confidence on eBay!. People who viewed this item also viewed. Used Command Communications ComSwitch 4 Port Line Sharing System · Used Command Communications .
Connect the provided 4-wire modular line cord from a standard telephone wall jack to this port. If this set-up does not meet the needs for your application, contact Customer Service for programming alternatives.
See ” Standard 2-line operations. To automatically route calls to your fax machine, you must use the phone company’s Distinctive Ring service DRS.
There is no factory setting for this feature. Answering incoming calls return to top.
To set the CS for 2-line operation, perform the following steps: ComSwitch — After the phone number in the auto-dialer in the sending computer, you will place an access code i. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. With this configuration, the calling fax only needs to dial your phone number, and ComSwitch completes transfers to the fax automatically.
Check your power connection. If a valid code is not received after 1 minute, the CS will disconnect the call. If your answering machine answers a call from the TAD port, the caller can perform the following tasks: Connect the two filters together in series. See “Answering incoming calls” for transferring instructions.
ComSwitch 4 port Line Sharing Device – Phone, Answering Machine, Modem, Fax Switch
The factory setting for this feature is 30 seconds range of Important Notes return to top. You can then conduct the call normally, for as long as you like. While the CS is on-line transmitting the beeps, it also allows entry of the Security Access Code to enter ocmswitch remote comswktch mode.
Some fax machines do not produce fax tones, therefore, when you receive this type of call, press 11 on your tone phone, and then hang up.
Command Communications ComSwitch 7500 4 Port Line Sharing System
This guide is designed to introduce you to the various installation and operational procedures for using the ComSwitch CS Command Communications is no longer in business since and does not support its products anymore. This guide is designed to introduce you to the various installation and operational procedures for using the ComSwitch CS The Department does not guarantee the equipment will operate to the user’s satisfaction.
Not all modem commacommands delay dialing for a 2 second interval. If, after answering a call, you hear silence on the line, the call is likely coming from a fax that does not produce a CNG tone. Back to home page.
In the HOME mode, all phones will ring up to 6 times factory setting. Ports on the Cmoswitch return to top. Configures ComSwitch to process calls by answering only line two, detecting signals, then ringing to the ports.
Installation on a telephone system return to top. Sign in for more lists. Why don’t fax calls transfer to the fax when I answer the comewitch The Department does not guarantee the equipment will operate to the user’s satisfaction. Retrieving answering machine messages from a remote location return to top. The Ringer Equivalence Number REN assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
Once your equipment is connected properly, perform the following steps:. Special operating notes return to top. ComSwitch — Voice Mail from the phone company is not compatible.
Configures ComSwitch to process calls by passing the telephone ring signal to the Phone and TAD ports, wait for an answer, then start detecting signals on line one to route the call.
The CS works with either of these systems. The CS is a state-of-the-art Telephone Line Sharing device which eliminates the extra dedicated telephone lines used to operate a fax, modem, or other telephone device. If you or your answering machine answer the call before this transfer occurs, the CS listens for the following signals: With the utility knife, cut into the cable to expose the red, green, black, and yellow wires.
The CS converts your fax machine into a full page, multi-document scanning system by using the built-in ComScan feature.
Links in this section: Culture by Nicolas Towner Nov 16, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment 750 and on, the user is encouraged to try to correct the interference by one or more of the following measures:. Phone companies offer this service under various names, check with your local phone company for details.
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.